Be A Cisco Expert Without Course or Certification

Change Cisco Password

Below is command to change cisco password or to add new password. You need user priviledge mode to execute this command.

Router>
Router>enable
Password:
Router#
Router#config terminal
Router(config)#enable secret new_password_here
Router(config)#exit
Router#copy running start
Router#exit

Popularity: 69%

Posted in Beginer Here | No Comments »

CLI Simple Cisco ASA/PIX Config

This config is for simple config ASA/PIX firewall with 2 network interface. One for outside (Internet) and other for inside (LAN). All traffic from internal to external is accepted. All traffic from external to internal is droped.

Requirement:
- Cisco ASA/PIX with 2 network interface
- IP Public/Outside IP Address (ie: 65.1.1.x)
- IP Private/Inside IP Address (ie: 192.168.1.x)
- Next hop/Gateway IP Address (ie: 65.1.1.1)
- PIX/ASA ver.7.x or above

Firewall> enable
Password:
Firewall#
Firewall# config terminal
Firewall(config)# interface Ethernet0
Firewall(config-if)# nameif outside
Firewall(config-if)# security-level 0
Firewall(config-if)# ip address 65.1.1.2 255.255.255.0
Firewall(config-if)# speed 100
Firewall(config-if)# duplex full
Firewall(config-if)# exit

Firewall(config)# interface Ethernet1
Firewall(config-if)# nameif inside
Firewall(config-if)# security-level 100
Firewall(config-if)# ip address 192.168.1.1 255.255.255.0
Firewall(config-if)# speed 100
Firewall(config-if)# duplex full

Firewall(config)# nat (inside) 1 0.0.0.0 0.0.0.0
Firewall(config)# global (outside) 1 65.1.1.3 netmask 255.255.255.224

Firewall(config)# route outside 0.0.0.0 0.0.0.0 65.1.1.1

Popularity: 96%

Posted in Firewall | 1 Comment »